Genuine INNO equipment, supplied and supported in the UK
Shop
Fusion splicers, OTDRs and cleavers, plus the batteries, tools and consumables that keep them working.
- Up to 3-year manufacturer warranty
- UK service and repair centre
- Same or next working day dispatch
- Expert advice before you buy
Showing 1–24 of 30 results
INNO M9+ Core Alignment Fusion Splicer
The INNO M9+ is a compact core alignment fusion splicer with AI-driven features, built-in IoT and GPS, and integration with INNO’s View Pro Manager platform. It delivers splicing in as little as 4 seconds and heating from 9 seconds, combining high performance with a lightweight field-ready design.
INNO View 8X Core Alignment Fusion Splicer
The INNO View 8X is a premium core alignment fusion splicer designed for high-performance professional fibre installation and maintenance. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, intelligent View Pro Manager connectivity and up to 350 splice-and-heat cycles, it combines precision, speed and advanced fleet management in one field-ready platform.
INNO View 6X Core Alignment Fusion Splicer
The INNO View 6X is a professional core alignment fusion splicer built for fast, accurate and reliable fibre installation and maintenance work. It combines 4-second splicing, 9-second heating, a 5-inch touchscreen, 7,000 mAh battery and up to 350 splice-and-heat cycles in a rugged field-ready platform.
INNO i4 Active V-Groove Fusion Splicer
The INNO i4 is a compact Active V-Groove cladding alignment fusion splicer designed for fast single-fibre installation and maintenance work. It offers splicing from 4 seconds, 13-second heating, a 4.3-inch full touchscreen and a 3,500 mAh battery providing up to approximately 200 splice-and-heat cycles.
INNO V2 High-Precision Fibre Cleaver
INNO V2+ Precision Fibre Cleaver
INNO V12 Fully Automatic Fibre Cleaver for Single and Ribbon Fibre
INNO Fibre Optic Stripper, 3-Hole Stripping Tool
INNO M7+ Active Cladding Alignment Fusion Splicer
The INNO M7+ is a compact, lightweight active cladding alignment fusion splicer designed for professional FTTH, FTTP and telecoms work. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, and integration with View Pro Manager, it combines fast field performance with intelligent equipment and job management.
INNO View650 Modular OTDR
INNO View300 Compact OTDR
The INNO View300 is a compact, lightweight OTDR designed for fast and accurate fibre network installation, maintenance and troubleshooting. With a 4.3-inch touchscreen, Event Map, built-in optical power meter, visual fault locator and light source, it combines essential fibre testing functions in one portable instrument.
Core Alignment Splicing Kit (Rental)
INNO Splice-On Connector (SOC), SC/APC and SC/UPC
The INNO Splice-On Connector (SOC) provides a fast and reliable method of terminating single-mode fibre using fusion splicing. Pre-polished and designed to protect the splice within the connector body, it is available in SC/APC and SC/UPC versions for 900 μm fibre and 3 mm cable, with individual and 10-pack options.
INNO V30X 4-in-1 Optical Fibre Tester
The INNO V30X Optical Fibre Tester combines four essential test functions in one compact handheld device: an optical power meter, frequency detection, visual fault locator and RJ-45 continuity tester. With support for key fibre wavelengths including 1490 nm and 1577 nm, USB-C charging and a clear display, it is a practical everyday tool for fibre and network technicians.
INNO TS Pro Thermal Fibre Stripper
The INNO TS Pro is a professional universal thermal fibre stripper designed for accurate removal of fibre coatings and jackets across a wide range of single and ribbon fibre applications. It supports 200–400 µm coatings, offers fast heating, long battery life and is built for demanding field environments.
INNO V20 Fibre Microscope for Connector Inspection
The INNO V20 Fibre Microscope is a compact handheld inspection tool for checking fibre connector end faces for contamination and damage. It features dual magnification, 3-level digital zoom, a 640 × 480 image sensor and USB 2.0 connectivity, making it suitable for professional fibre installation, testing and maintenance work.
INNO LBT-30 9000mAh Fusion Splicer Battery
INNO LBT-3000 Battery for M9+, M7+, M9 and M7 Fusion Splicers
INNO LBT-52 5200mAh Battery for View 5X, View 5 Pro, View 6S, View 5 and View 3
INNO LBT-7000 7000mAh Battery for View 6X
INNO JS-180300 Power Adapter for Splicers and OTDRs
Genuine INNO JS-180300 power adapter for a wide range of INNO fusion splicers and OTDRs, including the View X, View Pro, legacy View Series, IFS Series, View600 and Mini2. Suitable as a replacement or spare power supply for professional workshop and field use.
Compatible with:
- View 8X, View 5X, View 3X
- View 8 Pro, View 5 Pro, View 3 Pro
- View 3, View 5, View 6s, View 7, View 8+
- IFS-10, IFS-15s, IFS-15h
- OTDR: View600, Mini2
INNO JS-1618 Power Adapter for M9+, M7+, M9, M7 and View 1 Splicers
Genuine INNO JS-1618 power adapter for compatible INNO fusion splicers, including the M9+, M7+, M9, M7 and View 1. Ideal as a replacement or spare mains power supply for professional workshop and field use.
INNO JS-1500 Power Adapter for TS Pro and TS Plus Thermal Fibre Strippers
INNO CH-01 Universal Fibre Cleaver Holder
Can't find what you need?
We supply the full INNO range, including parts and accessories not listed here. Tell us what you need and we’ll get back to you as soon as possible.
