INNO i4 Active V-Groove Fusion Splicer
The INNO i4 is a compact Active V-Groove cladding alignment fusion splicer designed for fast single-fibre installation and maintenance work. It offers splicing from 4 seconds, 13-second heating, a 4.3-inch full touchscreen and a 3,500 mAh battery providing up to approximately 200 splice-and-heat cycles.
£1,100.00 +VAT
Included with every INNO splicer, backed by our UK service centre.
Quick enquiry
Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.
Key features
- 4 s
Fast active V-groove splicing
Quick mode splices in around 4 seconds, with typical loss of 0.02 dB on single-mode fibre.
- 9 s
Rapid heating
Shrinks 45 mm and 60 mm slim sleeves in as little as 9 seconds.
- 200
Cycles on one charge
The 3,500 mAh battery gives up to 200 splice-and-heat cycles.
- Auto
Automatic arc calibration
Arc power adjusts automatically to air pressure and temperature for consistent results.
- 3×2
Drop cable ready
Handles fibre from 100 µm to 3 mm coating, including 3×2 mm drop cable.
- Compact
One of the most compact splicers
Small and light at under 1.6 kg, with a 4.3″ touchscreen.
Overview
The INNO i4 is a compact professional fusion splicer designed for technicians working on FTTH, FTTP, access networks and everyday fibre installation and maintenance projects.
Using Active V-Groove cladding alignment, the i4 actively positions the fibres before fusion to provide consistent alignment while retaining a compact, lightweight design suitable for field use.
Quick Mode provides an average splice time of approximately 4 seconds, with SM Mode at approximately 5 seconds. The integrated heater completes compatible sleeve heating in approximately 13 seconds, helping reduce overall splice-cycle time during repetitive installation work.
A 4.3-inch full-colour touchscreen provides clear fibre viewing and straightforward operation, while the 3,500 mAh rechargeable battery supports up to approximately 200 splice-and-heat cycles. The i4 can store up to 10,000 splice records and 10,000 splice images for ongoing field work.
INNO Instrument Exclusive Business Partner for the UK and Ireland
Why buy from Uptero
One team supports you from the first conversation to the last service, with everything your equipment needs in one place.
Expert sales advice
Help choosing the right equipment for your work and budget.
Manufacturer warranty
INNO warranty cover, handled here in the UK.
Service and repair
Calibration, servicing and repairs at our UK service centre.
Rental equipment
Splicers to hire for projects, busy periods and backup.
Accessories and spares
Genuine INNO parts, consumables and accessories in UK stock.
Technical support
Engineers on hand for faults, software updates and everyday questions.
Specifications
Technical specifications
| Model | i4 |
|---|---|
| Alignment method | Cladding alignment |
| Number of fibres | Single |
| Applicable fibres | SM (G.652 & G.657) / MM (G.651) / DS (G.653) / NZDS (G.655) / CS (G.654) / EDF |
| Coating diameter | 100 µm – 3 mm, drop cable 3 × 2 mm |
| Cladding diameter | 80–150 µm |
| Cleave length | 5–16 mm |
| Typical splice loss | SM 0.02 dB / MM 0.01 dB / DS 0.04 dB / NZDS 0.04 dB / G.657 0.02 dB |
| Return loss | > 60 dB |
| Splice time |
|
| Splice programmes | Max. 300 modes |
| Automatic calibration | Automatic arc calibration by air pressure & temperature |
| Electrode lifespan | 6,000 arc discharges |
| Heating programmes | Max. 100 modes |
|---|---|
| Heating time |
|
| Protection sleeve | 20–60 mm |
| Data output | USB-C |
| Splice memory | 10,000 splice records / 10,000 images |
| Battery |
|
| Power supply | AC 100–240 V, DC 9–19 V |
| Monitor | 4.3" colour LCD, full touchscreen |
| Magnification | ×130, ×320 |
| Size (H × W × D) | 145 × 140 × 150 mm |
| Weight | 1.598 kg (1.310 kg without battery) |
| Pull test | 1.96–2.25 N |
* Splice time is measured from fibres entering the screen until the estimated loss is displayed, and can vary with calibration status.
* Battery measured as a 1-minute cycle of splicing and heating in Power Save mode.
Package & accessories
| In the box | Model |
|---|---|
| Cleaver | V2 |
| SOC holder | FH-SOC-R |
| SOC heater cover | HTS-SOC-07 |
| Cooling tray | CG-26 |
| Electrodes | E-50 |
| Battery pack | LBT-5000C |
| USB adapter | USB-8P |
| USB charging cable | USB-11P |
| Carrying case | ICC-61 |
| Shoulder strap | ST-02 |
Environmental conditions & tests
- IPX2Water resistance
- 76 cm dropShock resistance
- IP5XDust resistance
| Operating conditions |
|
|---|---|
| Storage conditions |
|
| Resistance tests |
|
Downloads & support
Software for this product, plus direct access to our UK technical team.
Software updates
- DownloadSoftware 1.05For units on V1.xx
General improvements
How to update
Update Instructions Prepare USB Format a USB drive as FAT32. Prepare file The software archive must be named update.zip. If the downloaded ZIP has another filename, rename it to update.zip. Do not extract it unless the selected software version says otherwise. Copy file Place update.zip directly in the USB drive root (main directory) — not inside a folder. Start upgrade Insert the USB drive and start the software upgrade from the on-device menu.
Need a different version? Contact us or WhatsApp
PC programs
- USB port driver for Windows 8 and 10 (64-bit)ZIP, 6.1 MBDownload
Release notes
Install this driver if your PC does not recognise the splicer when connected by USB. - INNO PC ProgramVersion 1.21 · ZIP, 81.0 MBDownload
Release notes
Download splice records from your INNO splicer and create reports on a Windows PC.
Every INNO splicer from Uptero carries a 3-year warranty. If it ever needs attention, our UK service centre turns repairs around in about 3 working days.
Ask our technical team
Questions about a fault, a software update or using this product? Send us the details and our UK engineers will get back to you.
Related products
INNO M9+ Core Alignment Fusion Splicer
The INNO M9+ is a compact core alignment fusion splicer with AI-driven features, built-in IoT and GPS, and integration with INNO’s View Pro Manager platform. It delivers splicing in as little as 4 seconds and heating from 9 seconds, combining high performance with a lightweight field-ready design.
INNO View 8X Core Alignment Fusion Splicer
The INNO View 8X is a premium core alignment fusion splicer designed for high-performance professional fibre installation and maintenance. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, intelligent View Pro Manager connectivity and up to 350 splice-and-heat cycles, it combines precision, speed and advanced fleet management in one field-ready platform.
INNO View 6X Core Alignment Fusion Splicer
The INNO View 6X is a professional core alignment fusion splicer built for fast, accurate and reliable fibre installation and maintenance work. It combines 4-second splicing, 9-second heating, a 5-inch touchscreen, 7,000 mAh battery and up to 350 splice-and-heat cycles in a rugged field-ready platform.
INNO M7+ Active Cladding Alignment Fusion Splicer
The INNO M7+ is a compact, lightweight active cladding alignment fusion splicer designed for professional FTTH, FTTP and telecoms work. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, and integration with View Pro Manager, it combines fast field performance with intelligent equipment and job management.

