Discontinued · Still supported

View 3

The INNO View 3 fusion splicer is no longer sold, but Uptero still services, repairs and supports it.

This model is no longer sold. We still service and repair it, and you can download the latest software below.

Software updates

Check the software version shown on your unit first. Each generation has its own software, and a unit can only be updated within its generation.

Software 3.00For units on V3.xx

Initial release

How to update

Update Instructions
Prepare USB	Format a USB drive as FAT32.
Prepare file	The software archive must be named update.zip. If the downloaded ZIP has another filename, rename it to update.zip. Do not extract it unless the selected software version says otherwise.
Copy file	Place update.zip directly in the USB drive root (main directory) — not inside a folder.
Start upgrade	Insert the USB drive and start the software upgrade from the on-device menu.
Exceptions	If an Upgrade Method is shown for the selected software version, follow that method instead of the standard update.zip procedure.
Important	V1.xx / V3.xx are separate generations and are not interchangeable.

Software 1.39For units on V1.xx
General improvements
How to update
If the currently installed V1.xx software is V1.33 or earlier, first use F7_sw_m6.bin and res.zip, then run update.zip. On later V1.xx software, use the standard update.zip method.
Download

Need a different version? Contact us or WhatsApp

Looking to upgrade? These current models are the closest match.