INNO M7+ Active Cladding Alignment Fusion Splicer
The INNO M7+ is a compact, lightweight active cladding alignment fusion splicer designed for professional FTTH, FTTP and telecoms work. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, and integration with View Pro Manager, it combines fast field performance with intelligent equipment and job management.
£1,850.00 +VAT
Included with every INNO splicer, backed by our UK service centre.
Quick enquiry
Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.
Key features
- 4 s
Fast cladding-alignment splicing
Active V-groove cladding alignment for quick, reliable splices on last-mile and FTTH work.
- 9 s
Rapid heating
Fast, even heat shrinks a 60 mm slim sleeve in as little as 9 seconds.
- 1.49 kg
Lightweight and compact
Easy to carry, set up and use in confined spaces and on remote installs.
- GPS
Built-in GPS and wireless
Geo-tagged splice results sync to View Pro Manager for real-time job tracking.
- 200
Cycles on one charge
The 3,000 mAh battery gives up to 200 splice-and-heat cycles and charges over USB-C.
- 6,000
Arcs per electrode set
Electrodes optimised for splice quality last up to 6,000 arcs.
Overview
The INNO M7+ is a compact professional fusion splicer built for engineers who require fast, reliable single-fibre splicing in a portable field-ready platform.
Using Active V-Groove cladding alignment, the M7+ delivers consistent fibre positioning while maintaining the compact dimensions and lower weight required for day-to-day installation and maintenance work.
The splicer offers a Quick Mode splice time of approximately 4 seconds and heating from 9 seconds, helping technicians work efficiently across FTTH, FTTP, access network and general telecoms projects.
Built-in IoT connectivity and GPS allow the M7+ to connect with INNO’s View Pro Manager ecosystem for equipment tracking, splice data management and job-related information.
Automatic arc calibration compensates for environmental changes such as temperature and air pressure, supporting reliable performance across different working conditions.
INNO Instrument Exclusive Business Partner for the UK and Ireland
Why buy from Uptero
One team supports you from the first conversation to the last service, with everything your equipment needs in one place.
Expert sales advice
Help choosing the right equipment for your work and budget.
Manufacturer warranty
INNO warranty cover, handled here in the UK.
Service and repair
Calibration, servicing and repairs at our UK service centre.
Rental equipment
Splicers to hire for projects, busy periods and backup.
Accessories and spares
Genuine INNO parts, consumables and accessories in UK stock.
Technical support
Engineers on hand for faults, software updates and everyday questions.
View Pro Manager compatible
Manage every splicer from one dashboard
This splicer connects to View Pro Manager, INNO’s cloud platform for fusion splicer fleets. Follow results as they happen, keep complete records for audits and keep every splicer set up the way you want it.
- Live and historical splice results, with images and estimated loss
- GPS location of each splicer and job site
- Locked, pre-approved settings for every technician
- PDF reports and preventive maintenance alerts
Specifications
Technical specifications
| Model | M7+ |
|---|---|
| Alignment method | Cladding alignment |
| Number of fibres | Single |
| Applicable fibres | SM (G.652 & G.657) / MM (G.651) / DS (G.653) / NZDS (G.655) |
| Coating diameter | 100 µm – 3 mm |
| Cladding diameter | 80–150 µm |
| Cleave length | 5–16 mm |
| Typical splice loss | SM 0.03 dB / MM 0.01 dB / DS 0.05 dB / NZDS 0.05 dB / G.657 0.03 dB |
| Return loss | > 60 dB |
| Splice time |
|
| Splice programmes | Max. 300 modes |
| Automatic calibration | Automatic arc calibration by air pressure & temperature |
| Electrode lifespan | 6,000 arc discharges |
| Heating programmes | Max. 100 modes |
|---|---|
| Heating time |
|
| Protection sleeve | 20–60 mm |
| Data output | View Pro Manager (cloud), USB-C |
| Splice memory | 20,000 splice records / 10,000 images |
| Battery |
|
| Power supply | AC 100–240 V, DC 9–19 V |
| Monitor | 4.3" colour LCD, full touchscreen |
| Magnification | ×320 |
| Size (H × W × D) | 124 × 144 × 131 mm |
| Weight | 1.49 kg |
| Pull test | 1.96–2.25 N |
* Splice time is measured from fibres entering the screen until the estimated loss is displayed, and can vary with calibration status.
* Battery measured as a 1-minute cycle of splicing and heating in Power Save mode.
Environmental conditions & tests
- IPX2Water resistance
- 76 cm dropShock resistance
- IP5XDust resistance
| Operating conditions |
|
|---|---|
| Storage conditions |
|
| Resistance tests |
|
Downloads & support
Software for this product, plus direct access to our UK technical team.
Software updates
- DownloadSoftware 1.04For units on V1.xx
Updated German, Ukrainian, Finnish language support
Supports up to 300 splice modes
Supports up to 100 heat modes
Add message function, receive VPM messages
Can now set heating time from 5 to 900 seconds
General improvements
How to update
When upgrading a unit on V1.00–V1.02, extract the downloaded package, copy all extracted files to the USB root and run the software upgrade twice.
Need a different version? Contact us or WhatsApp
PC programs
- USB port driver for Windows 8 and 10 (64-bit)ZIP, 6.1 MBDownload
Release notes
Install this driver if your PC does not recognise the splicer when connected by USB. - INNO PC ProgramVersion 1.21 · ZIP, 81.0 MBDownload
Release notes
Download splice records from your INNO splicer and create reports on a Windows PC.
Every INNO splicer from Uptero carries a 3-year warranty. If it ever needs attention, our UK service centre turns repairs around in about 3 working days.
Ask our technical team
Questions about a fault, a software update or using this product? Send us the details and our UK engineers will get back to you.
Related products
INNO M9+ Core Alignment Fusion Splicer
The INNO M9+ is a compact core alignment fusion splicer with AI-driven features, built-in IoT and GPS, and integration with INNO’s View Pro Manager platform. It delivers splicing in as little as 4 seconds and heating from 9 seconds, combining high performance with a lightweight field-ready design.
INNO View 8X Core Alignment Fusion Splicer
The INNO View 8X is a premium core alignment fusion splicer designed for high-performance professional fibre installation and maintenance. With splicing from 4 seconds, heating from 9 seconds, built-in IoT and GPS, intelligent View Pro Manager connectivity and up to 350 splice-and-heat cycles, it combines precision, speed and advanced fleet management in one field-ready platform.
INNO View 6X Core Alignment Fusion Splicer
The INNO View 6X is a professional core alignment fusion splicer built for fast, accurate and reliable fibre installation and maintenance work. It combines 4-second splicing, 9-second heating, a 5-inch touchscreen, 7,000 mAh battery and up to 350 splice-and-heat cycles in a rugged field-ready platform.
INNO i4 Active V-Groove Fusion Splicer
The INNO i4 is a compact Active V-Groove cladding alignment fusion splicer designed for fast single-fibre installation and maintenance work. It offers splicing from 4 seconds, 13-second heating, a 4.3-inch full touchscreen and a 3,500 mAh battery providing up to approximately 200 splice-and-heat cycles.

