INNO Single Fibre Holders
Magnetic fibre holders that keep the fibre clamped from stripping through to splicing. Sold as a left and right pair.
- Magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer
- Fibre stays in the holder for every step, so its length and position don’t change
- Built-in scale for setting the cleave length
- Interchangeable, so one splicer can work with different fibre types
£60.00 – £120.00Price range: £60.00 through £120.00 +VAT
Not sure which holder fits your splicer? Check the compatibility table.
Quick enquiry
Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.
Description
Fibre holders that stay with the fibre
Once the fibre is clamped in the holder, it stays there. You strip it, clean it, cleave it and load it into the splicer without taking it out or measuring again. The magnetic base sits in the same position on each tool, so the cleave length and fibre position are the same every time.
Why it matters for splice quality
A cleave that’s the wrong length, or fibre that’s moved between steps, is a common cause of high splice loss. Keeping the fibre in one holder from start to finish takes both out of the equation, which means more consistent results and fewer re-splices on site.
Choosing the right holder
Holders are matched to the splicer and to the fibre you’re working with. Check the compatibility table, or send us your splicer model and fibre type and we’ll confirm the right holder before you order.
Sold as a pair
Each order is one left and one right holder, a full set for one splicer. Prices are per pair.
Not sure which holder you need? Call or WhatsApp us on +44 1793 239693 and we’ll check it against your splicer.
Compatibility
Find your splicer in the left column to see which holders fit it. Holder names link to the right option on the product page.
| Splicer | Single fibre holders | Ribbon fibre holders |
|---|---|---|
| M9+ | FH-200/250SFormerly FH-M-200/250 FH-900SFormerly FH-M-900 FH-45 | Not available |
| M7+ | FH-200/250SFormerly FH-M-200/250 FH-900SFormerly FH-M-900 FH-45 | Not available |
| View 8X | FH-200/250SFormerly FH-M-200/250 FH-900SFormerly FH-M-900 FH-45 | Not available |
| View 6X | FH-200/250SFormerly FH-M-200/250 FH-900SFormerly FH-M-900 FH-45 | Not available |
| i4 | FH-200/250SFormerly FH-M-200/250 FH-900SFormerly FH-M-900 FH-45 | Not available |
| View 12X | FH-250 FH-900 | FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B |
| View 12R Pro | FH-250 FH-900 | FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B |
| View 12R | FH-250 FH-900 | FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B |
| M9 | FH-40 | Not available |
| M7 | FH-40 | Not available |
| View 7 | FH-40 | Not available |
| View 5 | FH-40 | Not available |
| View 3 | FH-40 | Not available |
| View 1 | FH-40 | Not available |
Thermal strippers and cleavers
Every fibre holder here, single and ribbon, fits any INNO thermal stripper and fibre cleaver. The fibre stays clamped as you move the holder from stripper to cleaver to splicer.
| Tool | Models |
|---|---|
| Thermal strippers | TS Pro, TS Plus, TS-1 |
| Fibre cleavers | V1, V2, V2+, V10 Pro, V12 |
Your splicer isn't listed? Ask our team and we'll check it for you.
Frequently asked questions
Which fibre holders fit my splicer?
Each holder lists the splicers it fits, and the compatibility table shows every holder by splicer model. If yours isn't listed, send us the model and we'll check.
Why are they sold as a pair?
The splicer takes one holder on each side, so you need a left and a right to splice. Each order is a full set for one splicer.
Can I use the same holders on the stripper, cleaver and splicer?
Yes. That's what they're designed for. The magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer, so the fibre stays clamped throughout.
My holder has a different name. Is it the same part?
Some holders now have a new name. Both names are shown next to each model, so you can match it to the one you already use. Where a holder has changed in design, it's listed as a separate product.
How do I set the cleave length?
Single fibre holders have a built-in scale. Line the fibre up to the mark for the cleave length you need, then close the clamp. The fibre stays at that length through cleaving and splicing.
What is the difference between the FH-12 200/250A and 200/250B?
The A version is only for Sumitomo FreeForm ribbon cable. The B version is for other ribbon types, and its grooves run all the way up to the snout.
Can I splice single fibres on a ribbon splicer?
Yes. Fit the FH-250 for 250 µm primary coated fibre or the FH-900 for 900 µm secondary coated fibre. Both fit the View 12R, View 12R Pro and View 12X.
How quickly will they arrive?
In-stock holders are dispatched from our UK stock the same or next working day.
Support
Documents for this product, plus direct access to our UK team.
Tell us the model of your splicer, cleaver or tester and we'll confirm compatibility before you order.
Ask our team
Not sure this fits your equipment, or need a part we don’t list? Send us the details and our UK team will get back to you as soon as possible.
Related products
INNO Ribbon Fibre Holders
Magnetic fibre holders for INNO ribbon splicers, for 2 to 12-fibre ribbon and for single fibre. Sold as a left and right pair.
Which holder for which fibre
- FH-02 2-fibre ribbon
- FH-04 4-fibre ribbon
- FH-06 6-fibre ribbon
- FH-08 8-fibre ribbon
- FH-10 10-fibre ribbon
- FH-12 12-fibre ribbon
- FH-12 200/250A 12-fibre Sumitomo FreeForm ribbon only
- FH-12 200/250B 12-fibre, other ribbon types, grooves up to the snout
- FH-250 Single 250 µm primary coated fibre
- FH-900 Single 900 µm secondary coated fibre
- Magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer
- Ribbon stays in the holder for every step, so fibre alignment and length don’t change
INNO FH-45 Versatile Fibre Holders, Left and Right Pair
Versatile magnetic fibre holders for standard fibre and loose-tube fibre, so one set covers most jobs. Sold as a left and right pair.
- Magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer
- Switch between standard and loose-tube fibre without changing holders
- Fibre stays in the holder for every step, so its length and position don’t change
- Built-in scale for setting the cleave length
Fits the M9+, M7+, View 8X, View 6X and i4.

