Fibernet Opera Pneumatic Cable Blowing Machine

The Fibernet Opera is a pneumatic cable blowing machine for backbone and feeder routes. It installs cables from 4 to 16 mm into ducts from 7 to 63 mm with up to 900 N of pushing force, and you set the maximum thrust so the cable is never pushed harder than it should be. Pushing force, belt clamping and cable slip show live on the 4.3-inch display.

Price on request

Quick enquiry

Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.






    We’ll get back to you as soon as possible.

    Key features

    • 900 N

      Pushing force

      Enough thrust to carry the cable through bends and past obstacles on long backbone runs.

    • 4–16 mm

      Cable diameter

      One machine for mini cables through to larger backbone cables.

    • 7–63 mm

      Duct diameter

      Integrated adapters from 7 to 20 mm, with the external set for 25 to 63 mm in the box.

    • 110 m/min

      Laying speed

      Up to 110 metres a minute when the route and duct allow it.

    • 4.3″

      Live data display

      Set the thrust limit and belt clamping, then watch pushing force and cable slip as you blow.

    • IP54

      Protected electronics

      Built to keep working in rain and on dusty sites.

    Description

    The Fibernet Opera is Fibernet’s pneumatic cable blowing machine for the bigger end of the network. It’s made for contractors installing backbone and feeder cables, where long routes and larger cables need real pushing force. Force on its own is not the point. Before you start, you set the maximum pushing force the cable can take, and the machine will not go past it. Electronic slip control watches the belts and flags the moment they start to slip on the cable.

    Settings you can repeat

    Belt clamping is set pneumatically and the value is shown on screen, so once a cable and duct combination works you can set the next job up the same way. The electronic meter counter measures in both directions, and the machine can also run in fully manual mode. Pushing force: up to 900 N Laying speed: up to 110 m/min Clamping force: 3,200 N

    Fibernet Opera on its stand
    MADE IN ITALY BY FIBERNET

    The details that matter on site

    Fibernet Opera front view showing the pressure chamber

    Airtight pressure chamber

    Fibernet’s own sealing design keeps air leakage to a minimum, so more of the compressor’s air goes into the duct.

    Fibernet Opera belt drive close up

    Pneumatic belt opening

    Belts open and close on air, and clamping is adjusted by hand with the value shown on screen. A belt can be changed in under 30 seconds.

    Fibernet Opera mounted on its case as a support stand

    A case that becomes the stand

    The flight case protects the machine in the van or on a plane, then opens out as its working stand.

    Fibernet Opera control panel and display

    Reverse lever

    A dedicated lever reverses the drive, so you can pull the cable back under control when you need to.

    FIBERNET APP

    A report for every cable you blow

    Fibernet machines connect to the Fibernet App, which records the whole installation and builds a PDF report you can keep, export by USB or email straight from site, ready for the client at handover.

    • Live pushing force, speed, air pressure and belt slip
    • Distance-based graph to the Deutsche Telekom format, or a time-based graph
    • Every laying parameter in one PDF as proof of installation
    • Graphs to compare jobs and fine-tune your settings
    Fibernet App on a tablet showing a live installation report

    Other Fibernet cable blowing machines

    If you’d rather not drive the machine with compressor air, the Fibernet Opera Elettrica is the fully electric version for the same 4 to 16 mm cables. For mini and micro cables there is the Fibernet Geniale, and for the last mile the 5 kg Fibernet Lady.

    INNO Instrument Exclusive Business Partner for the UK and Ireland

    Why buy from Uptero

    One team supports you from the first conversation to the last service, with everything your equipment needs in one place.

    Expert sales advice

    Help choosing the right equipment for your work and budget.

    Manufacturer warranty

    INNO warranty cover, handled here in the UK.

    Service and repair

    Calibration, servicing and repairs at our UK service centre.

    Rental equipment

    Splicers to hire for projects, busy periods and backup.

    Accessories and spares

    Genuine INNO parts, consumables and accessories in UK stock.

    Technical support

    Engineers on hand for faults, software updates and everyday questions.

    Specifications

    Technical specifications

    ModelOpera
    DrivePneumatic
    NetworkBackbone, feeder
    Cable diameterØ 4–16 mm
    Duct diameterØ 7–63 mm
    Pushing forceUp to 900 N
    Laying speedUp to 110 m/min
    Clamping force3,200 N
    Max air pressure16 bar
    Air connection3/4″ claw coupling
    Display4.3″, live installation data
    Electronic controlMaximum pushing force limit, cable slip detection
    Installation reportingFibernet App on a dedicated tablet over Wi-Fi, PDF by email or USB
    ApprovalDeutsche Telekom DTAG ZTV 40-II
    Size (machine)565 × 252 × 360 mm
    Size (case)700 × 500 × 800 mm
    Weight25 kg

    Duct adapters

    Integrated duct adapters7, 8, 10, 12, 14, 16, 18 and 20 mm
    External duct adapters25, 32, 40, 50 and 63 mm

    Package & accessories

    In the boxModel
    Fibernet Opera cable blowing machine
    External duct adapter set, 25 to 63 mm
    Flight case, converts to a support stand

    Environment

    Protection ratingIP54

    Support

    Documents for this product, plus direct access to our UK team.

    Not sure it fits?

    Tell us the model of your splicer, cleaver or tester and we'll confirm compatibility before you order.

    Ask our team

    Not sure this fits your equipment, or need a part we don’t list? Send us the details and our UK team will get back to you as soon as possible.








      We’ll get back to you as soon as possible.