Fibernet Opera Pneumatic Cable Blowing Machine
The Fibernet Opera is a pneumatic cable blowing machine for backbone and feeder routes. It installs cables from 4 to 16 mm into ducts from 7 to 63 mm with up to 900 N of pushing force, and you set the maximum thrust so the cable is never pushed harder than it should be. Pushing force, belt clamping and cable slip show live on the 4.3-inch display.
Price on request
Quick enquiry
Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.
Key features
- 900 N
Pushing force
Enough thrust to carry the cable through bends and past obstacles on long backbone runs.
- 4–16 mm
Cable diameter
One machine for mini cables through to larger backbone cables.
- 7–63 mm
Duct diameter
Integrated adapters from 7 to 20 mm, with the external set for 25 to 63 mm in the box.
- 110 m/min
Laying speed
Up to 110 metres a minute when the route and duct allow it.
- 4.3″
Live data display
Set the thrust limit and belt clamping, then watch pushing force and cable slip as you blow.
- IP54
Protected electronics
Built to keep working in rain and on dusty sites.
Description
The Fibernet Opera is Fibernet’s pneumatic cable blowing machine for the bigger end of the network. It’s made for contractors installing backbone and feeder cables, where long routes and larger cables need real pushing force. Force on its own is not the point. Before you start, you set the maximum pushing force the cable can take, and the machine will not go past it. Electronic slip control watches the belts and flags the moment they start to slip on the cable.
Settings you can repeat
Belt clamping is set pneumatically and the value is shown on screen, so once a cable and duct combination works you can set the next job up the same way. The electronic meter counter measures in both directions, and the machine can also run in fully manual mode. Pushing force: up to 900 N Laying speed: up to 110 m/min Clamping force: 3,200 N

The details that matter on site

Airtight pressure chamber
Fibernet’s own sealing design keeps air leakage to a minimum, so more of the compressor’s air goes into the duct.

Pneumatic belt opening
Belts open and close on air, and clamping is adjusted by hand with the value shown on screen. A belt can be changed in under 30 seconds.

A case that becomes the stand
The flight case protects the machine in the van or on a plane, then opens out as its working stand.

Reverse lever
A dedicated lever reverses the drive, so you can pull the cable back under control when you need to.
A report for every cable you blow
Fibernet machines connect to the Fibernet App, which records the whole installation and builds a PDF report you can keep, export by USB or email straight from site, ready for the client at handover.
- Live pushing force, speed, air pressure and belt slip
- Distance-based graph to the Deutsche Telekom format, or a time-based graph
- Every laying parameter in one PDF as proof of installation
- Graphs to compare jobs and fine-tune your settings

Other Fibernet cable blowing machines
If you’d rather not drive the machine with compressor air, the Fibernet Opera Elettrica is the fully electric version for the same 4 to 16 mm cables. For mini and micro cables there is the Fibernet Geniale, and for the last mile the 5 kg Fibernet Lady.
INNO Instrument Exclusive Business Partner for the UK and Ireland
Why buy from Uptero
One team supports you from the first conversation to the last service, with everything your equipment needs in one place.
Expert sales advice
Help choosing the right equipment for your work and budget.
Manufacturer warranty
INNO warranty cover, handled here in the UK.
Service and repair
Calibration, servicing and repairs at our UK service centre.
Rental equipment
Splicers to hire for projects, busy periods and backup.
Accessories and spares
Genuine INNO parts, consumables and accessories in UK stock.
Technical support
Engineers on hand for faults, software updates and everyday questions.
Specifications
Technical specifications
| Model | Opera |
|---|---|
| Drive | Pneumatic |
| Network | Backbone, feeder |
| Cable diameter | Ø 4–16 mm |
| Duct diameter | Ø 7–63 mm |
| Pushing force | Up to 900 N |
| Laying speed | Up to 110 m/min |
| Clamping force | 3,200 N |
| Max air pressure | 16 bar |
| Air connection | 3/4″ claw coupling |
|---|---|
| Display | 4.3″, live installation data |
| Electronic control | Maximum pushing force limit, cable slip detection |
| Installation reporting | Fibernet App on a dedicated tablet over Wi-Fi, PDF by email or USB |
| Approval | Deutsche Telekom DTAG ZTV 40-II |
| Size (machine) | 565 × 252 × 360 mm |
| Size (case) | 700 × 500 × 800 mm |
| Weight | 25 kg |
Duct adapters
| Integrated duct adapters | 7, 8, 10, 12, 14, 16, 18 and 20 mm |
|---|---|
| External duct adapters | 25, 32, 40, 50 and 63 mm |
Package & accessories
| In the box | Model |
|---|---|
| Fibernet Opera cable blowing machine | |
| External duct adapter set, 25 to 63 mm | |
| Flight case, converts to a support stand |
Environment
| Protection rating | IP54 |
|---|
Support
Documents for this product, plus direct access to our UK team.
Tell us the model of your splicer, cleaver or tester and we'll confirm compatibility before you order.
Ask our team
Not sure this fits your equipment, or need a part we don’t list? Send us the details and our UK team will get back to you as soon as possible.
Related products
Fibernet Lady Compact Cable Blowing Machine
Fibernet Opera Elettrica Electric Cable Blowing Machine
The Fibernet Opera Elettrica is a fully electric cable blowing machine for backbone and feeder routes. It delivers 650 N of constant pushing force with a 1,000 N peak and installs 4 to 16 mm cable into 7 to 63 mm duct. All of the compressor air goes into the duct, so it works well with small to medium compressors.
Fibernet Geniale Electric Cable Blowing Machine
The Fibernet Geniale is a fully electric cable blowing machine with a two-speed magnetic gearbox. First gear gives 400 N for mini cables from 4 to 8.5 mm. Second gear gives 100 N at up to 120 m/min for micro cables from 1.2 mm, so one machine covers in-building, distribution and much of the feeder network.


