INNO Single Fibre Holders

Magnetic fibre holders that keep the fibre clamped from stripping through to splicing. Sold as a left and right pair.

  • Magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer
  • Fibre stays in the holder for every step, so its length and position don’t change
  • Built-in scale for setting the cleave length
  • Interchangeable, so one splicer can work with different fibre types

Price range: £60.00 through £120.00 +VAT

Not sure which holder fits your splicer? Check the compatibility table.

Quick enquiry

Ask about price, availability, trade-in or a demonstration. We’ll know which product you’re looking at, so just tell us what you need.






    We’ll get back to you as soon as possible.

    Description

    Fibre holders that stay with the fibre

    Once the fibre is clamped in the holder, it stays there. You strip it, clean it, cleave it and load it into the splicer without taking it out or measuring again. The magnetic base sits in the same position on each tool, so the cleave length and fibre position are the same every time.

    Why it matters for splice quality

    A cleave that’s the wrong length, or fibre that’s moved between steps, is a common cause of high splice loss. Keeping the fibre in one holder from start to finish takes both out of the equation, which means more consistent results and fewer re-splices on site.

    Choosing the right holder

    Holders are matched to the splicer and to the fibre you’re working with. Check the compatibility table, or send us your splicer model and fibre type and we’ll confirm the right holder before you order.

    Sold as a pair

    Each order is one left and one right holder, a full set for one splicer. Prices are per pair.

    Not sure which holder you need? Call or WhatsApp us on +44 1793 239693 and we’ll check it against your splicer.

    Compatibility

    Find your splicer in the left column to see which holders fit it. Holder names link to the right option on the product page.

    SplicerSingle fibre holdersRibbon fibre holders
    M9+FH-200/250SFormerly FH-M-200/250
    FH-900SFormerly FH-M-900
    FH-45
    Not available
    M7+FH-200/250SFormerly FH-M-200/250
    FH-900SFormerly FH-M-900
    FH-45
    Not available
    View 8XFH-200/250SFormerly FH-M-200/250
    FH-900SFormerly FH-M-900
    FH-45
    Not available
    View 6XFH-200/250SFormerly FH-M-200/250
    FH-900SFormerly FH-M-900
    FH-45
    Not available
    i4FH-200/250SFormerly FH-M-200/250
    FH-900SFormerly FH-M-900
    FH-45
    Not available
    View 12XFH-250
    FH-900
    FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B
    View 12R ProFH-250
    FH-900
    FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B
    View 12RFH-250
    FH-900
    FH-02, FH-04, FH-06, FH-08, FH-10, FH-12, FH-12 200/250A, FH-12 200/250B
    M9FH-40Not available
    M7FH-40Not available
    View 7FH-40Not available
    View 5FH-40Not available
    View 3FH-40Not available
    View 1FH-40Not available

    Thermal strippers and cleavers

    Every fibre holder here, single and ribbon, fits any INNO thermal stripper and fibre cleaver. The fibre stays clamped as you move the holder from stripper to cleaver to splicer.

    ToolModels
    Thermal strippersTS Pro, TS Plus, TS-1
    Fibre cleaversV1, V2, V2+, V10 Pro, V12

    Your splicer isn't listed? Ask our team and we'll check it for you.

    Frequently asked questions

    Which fibre holders fit my splicer?

    Each holder lists the splicers it fits, and the compatibility table shows every holder by splicer model. If yours isn't listed, send us the model and we'll check.

    Why are they sold as a pair?

    The splicer takes one holder on each side, so you need a left and a right to splice. Each order is a full set for one splicer.

    Can I use the same holders on the stripper, cleaver and splicer?

    Yes. That's what they're designed for. The magnetic base locates on any INNO thermal stripper and cleaver, and on the splicer, so the fibre stays clamped throughout.

    My holder has a different name. Is it the same part?

    Some holders now have a new name. Both names are shown next to each model, so you can match it to the one you already use. Where a holder has changed in design, it's listed as a separate product.

    How do I set the cleave length?

    Single fibre holders have a built-in scale. Line the fibre up to the mark for the cleave length you need, then close the clamp. The fibre stays at that length through cleaving and splicing.

    What is the difference between the FH-12 200/250A and 200/250B?

    The A version is only for Sumitomo FreeForm ribbon cable. The B version is for other ribbon types, and its grooves run all the way up to the snout.

    Can I splice single fibres on a ribbon splicer?

    Yes. Fit the FH-250 for 250 µm primary coated fibre or the FH-900 for 900 µm secondary coated fibre. Both fit the View 12R, View 12R Pro and View 12X.

    How quickly will they arrive?

    In-stock holders are dispatched from our UK stock the same or next working day.

    Support

    Documents for this product, plus direct access to our UK team.

    Not sure it fits?

    Tell us the model of your splicer, cleaver or tester and we'll confirm compatibility before you order.

    Ask our team

    Not sure this fits your equipment, or need a part we don’t list? Send us the details and our UK team will get back to you as soon as possible.








      We’ll get back to you as soon as possible.